[NFSU] How to import vinyls using bintex
[NFSU] How to import vinyls using bintex
Download BinTex 0.3 from our utils section, unzip it somewhere on your HD and run it.
Unzip the content of the file custom vinyl you downloaded to somewhere on your hd. Open the readme file of the custom vinyl. Find out for which car are the custom vinyls. Then launch BinTex - File - Open: go to NFS Underground/Cars dir, then to the dir of the car the vinyl is for and open and open VINYLS.BIN.
Sort the vinyls inside the file by name (click on the Name).
Check the readme which two vinyls you must update. Then select the first one in BinTex (without _mask), go Texture - Import and then select the first dds file (without _m or _mask) from the custom vinyl you downloaded. Do the same for the second (*_mask).
Then go to File - Save, close BinTex, go to the game and select the vinyl you replaced in the car customize screen.
Note: the names of vinyls in BinTex are not necessarily the same as in the game. The readme of the custom vinyl should contain info on which vinyl should you replace, and what vinyl is that in the game.
If your game crashes after you selected a certain vinyl which you think you updated, then you probably changed the wrong vinyl type (there are 1color, 2color, 3color, unique and manufacturer vinyls).
You can get the original VINYLS.BIN off CD1.
Unzip the content of the file custom vinyl you downloaded to somewhere on your hd. Open the readme file of the custom vinyl. Find out for which car are the custom vinyls. Then launch BinTex - File - Open: go to NFS Underground/Cars dir, then to the dir of the car the vinyl is for and open and open VINYLS.BIN.
Sort the vinyls inside the file by name (click on the Name).
Check the readme which two vinyls you must update. Then select the first one in BinTex (without _mask), go Texture - Import and then select the first dds file (without _m or _mask) from the custom vinyl you downloaded. Do the same for the second (*_mask).
Then go to File - Save, close BinTex, go to the game and select the vinyl you replaced in the car customize screen.
Note: the names of vinyls in BinTex are not necessarily the same as in the game. The readme of the custom vinyl should contain info on which vinyl should you replace, and what vinyl is that in the game.
If your game crashes after you selected a certain vinyl which you think you updated, then you probably changed the wrong vinyl type (there are 1color, 2color, 3color, unique and manufacturer vinyls).
You can get the original VINYLS.BIN off CD1.
Last edited by Bojan on 28 Oct 2004, 08:33, edited 1 time in total.
I can add some things to what bobyx said, and comment on some common problems I encountered, when working with vinyls
1) If you didn't unlock some vinyl during the game, and the mod uses that vinyl - than you obviously can't use the mod. For example I often choose AUTO ZONE vinyl to replace it with mine - so if you haven't yet unlocked it - than you can't use the mod.... hope that's clear!
2) The *.dds files are named, as mentioned, differently to what they are in your game... So Cutom1 may appear as Sam's Custom 5 or something like that... With side vinyls, this approach may guide you: LEVEL 3 vinyls would be named 306, 307 and similar... Level 2 - 225, 226 and so on. And Level 1 will start with 1s. But this isn't an absolute rule, just a general guide to know where to look for vinyls that contain 1, 2 or 3 colors.
3) The game may crash if you decided to modify the downloaded vinyl and import it back. If your custom car is the last car you used, you may even lose access to customizing ANY car under that profile. My advice, when exiting the game - remove the custom vinyls from the car if you plan to modify it.
4) The game may crash in this case also: you modify a vinyl that’s saved already as .dds file (this means modifying original and mask files)… You can avoid this by modifying the files in a Photoshop document you originally worked with before you saved files in .dds format. If this is unclear let me know.
5) Save dds in 256 ARGB palette colors (8bit).
6) The original BIN files for all cars are located in the first CD of NeedForSpeed Undeground
___________________________________________________________
That’s my 2 cents, hope it helps some ppl who experience problems
1) If you didn't unlock some vinyl during the game, and the mod uses that vinyl - than you obviously can't use the mod. For example I often choose AUTO ZONE vinyl to replace it with mine - so if you haven't yet unlocked it - than you can't use the mod.... hope that's clear!
2) The *.dds files are named, as mentioned, differently to what they are in your game... So Cutom1 may appear as Sam's Custom 5 or something like that... With side vinyls, this approach may guide you: LEVEL 3 vinyls would be named 306, 307 and similar... Level 2 - 225, 226 and so on. And Level 1 will start with 1s. But this isn't an absolute rule, just a general guide to know where to look for vinyls that contain 1, 2 or 3 colors.
3) The game may crash if you decided to modify the downloaded vinyl and import it back. If your custom car is the last car you used, you may even lose access to customizing ANY car under that profile. My advice, when exiting the game - remove the custom vinyls from the car if you plan to modify it.
4) The game may crash in this case also: you modify a vinyl that’s saved already as .dds file (this means modifying original and mask files)… You can avoid this by modifying the files in a Photoshop document you originally worked with before you saved files in .dds format. If this is unclear let me know.
5) Save dds in 256 ARGB palette colors (8bit).
6) The original BIN files for all cars are located in the first CD of NeedForSpeed Undeground
___________________________________________________________
That’s my 2 cents, hope it helps some ppl who experience problems
-
- Ricer
- Posts: 10
- Joined: 23 Jan 2004, 05:49
dds plugin for paintshop pro and photoshop[goes in plugins folder]
http://download.nvidia.com/developer/NV ... te/dds.8bi
http://download.nvidia.com/developer/NV ... te/dds.8bi
-
- Stock
- Posts: 1
- Joined: 26 Jan 2004, 17:39
- SuperRacer
- NFSUnlimited Staff
- Posts: 1125
- Joined: 11 Sep 2002, 21:50
- Location: USA
- Contact:
-
- Stock
- Posts: 2
- Joined: 24 Jan 2004, 06:59
- Location: Singapore
- Dragon-of-Rune
- Unbeatable
- Posts: 4200
- Joined: 13 Jan 2004, 19:29
- Location: The Netherlands
-
- Stock
- Posts: 2
- Joined: 24 Jan 2004, 06:59
- Location: Singapore
- Dragon-of-Rune
- Unbeatable
- Posts: 4200
- Joined: 13 Jan 2004, 19:29
- Location: The Netherlands
i downloaded http://www.nfsunlimited.net/index.php?g ... view&id=39 and it says it replaced a body vinal but i cant find the body vinals in BinTex. I reall want to use that vinal but i dont know where to put it. Help please.
Did you install the required DLLs?
http://developer.nvidia.com/object/nv_t ... tools.html
http://developer.nvidia.com/object/nv_t ... tools.html
- Dragon-of-Rune
- Unbeatable
- Posts: 4200
- Joined: 13 Jan 2004, 19:29
- Location: The Netherlands
- heavyarmor
- Stock
- Posts: 2
- Joined: 06 Feb 2004, 10:47
hi
i dont know how to use it.
i just dont understand the instructions
i dont know how to use it.
i just dont understand the instructions
Last edited by heavyarmor on 07 Feb 2004, 05:52, edited 1 time in total.
- Dragon-of-Rune
- Unbeatable
- Posts: 4200
- Joined: 13 Jan 2004, 19:29
- Location: The Netherlands
Maybe you can add someone out of your own country to your msn list so he can explain it to you step by step. I am helping a guy from my own country two with msn and it really helps him. So maybe it wil help for you two and if you are from the netherlands just add me to your msn list so i can explain it to you.
Dragon-of-Rune
Dragon-of-Rune
- XcoldstarX
- Ricer
- Posts: 47
- Joined: 21 Feb 2004, 04:41
Wrong colors in my vinyles
Hello !
I use psp7 to create my vinyles in 256 colors (DDS ARGB)
When i use my vinyles in nfs, they are blue.
And when i open an original vinyle in psp7 (ex: the SKYLINE_CUSTOM1), the colors are different from the game.
Do i modify the dds properties when i save it to keep the real colors ?
Thank you
I use psp7 to create my vinyles in 256 colors (DDS ARGB)
When i use my vinyles in nfs, they are blue.
And when i open an original vinyle in psp7 (ex: the SKYLINE_CUSTOM1), the colors are different from the game.
Do i modify the dds properties when i save it to keep the real colors ?
Thank you
Vinyles in blue
I found why my vinyles are blue but not yet how avoid this.
Vinyles are blue because the red and blue value are inverted (RGB corrspond to BGR).
When i replace the blue and red values in psp7 (with my hands so it is verry long), the picture is blue in psp but in nfs its ok.
Someone know this problem and can help me ?
Vinyles are blue because the red and blue value are inverted (RGB corrspond to BGR).
When i replace the blue and red values in psp7 (with my hands so it is verry long), the picture is blue in psp but in nfs its ok.
Someone know this problem and can help me ?