NFSU Demo Drag Times
NFSU Demo Drag Times
So what are your best drag times?
I played drag for about 3 hours today and I think I got pretty good.
Only post offline results, as it's waay easier to get a better result online.
I played drag for about 3 hours today and I think I got pretty good.
Only post offline results, as it's waay easier to get a better result online.
- Attachments
-
- nfsu5.jpg
- (35.85 KiB) Downloaded 5865 times
- SuperRacer
- NFSUnlimited Staff
- Posts: 1125
- Joined: 11 Sep 2002, 21:50
- Location: USA
- Contact:
- _I3urlNlouT_
- Drift King
- Posts: 309
- Joined: 09 Nov 2003, 20:58
- Location: Miami, FL
26.07
Not the best but still good 4 me 26.07
How come I see crowd in those screenshots, I dont have crowds WTF???
If there is a way to enable crowds in the demo tell me plz
BTw is there draft in multiplayer?
How come I see crowd in those screenshots, I dont have crowds WTF???
If there is a way to enable crowds in the demo tell me plz
BTw is there draft in multiplayer?
-
- Stock
- Posts: 1
- Joined: 10 Nov 2003, 00:22
my best is:
got a question to T-shine:
how did you get those people in nfsU??
got a question to T-shine:
how did you get those people in nfsU??
- Attachments
-
- 1.jpg
- (149.48 KiB) Downloaded 5736 times
-
- Ricer
- Posts: 20
- Joined: 10 Nov 2003, 11:53
- Location: Netherlands
AAAAAAAAAAAAAAAAAAAAA....
by 1/100 of a second!
by 1/100 of a second!
- Attachments
-
- nfsu7.jpg
- (45.88 KiB) Downloaded 5695 times
Haha... With a little training I managed to get this score...
I've heard 23.50 is possible... And even below that.
I've heard 23.50 is possible... And even below that.
- Attachments
-
- nfsu9.jpg
- (46.34 KiB) Downloaded 5693 times
-
- Ricer
- Posts: 20
- Joined: 10 Nov 2003, 11:53
- Location: Netherlands
-
- Ricer
- Posts: 20
- Joined: 10 Nov 2003, 11:53
- Location: Netherlands
- _I3urlNlouT_
- Drift King
- Posts: 309
- Joined: 09 Nov 2003, 20:58
- Location: Miami, FL
I've had my P4 2.4C running at 1200 mHz FSB 3.6 gHz processor OCZ DDR400 at 2-2-3-5 timings with a GeForce FX 5600 256MB OCed to 375 core 566 memory and a RAID0+2 array made of 2 10KRPM drives. The processor doesn't go much above about 50C or so. Thermalright SLK series soldered copper heatsink, lapped processor/heatsink, Artic Silver 3 and a 92mm Tornado on the processor plus 3 more in the case with 115CFM each of airflow keep it cool, even though it sounds like it's got a turbo in it =P
-
- Ricer
- Posts: 20
- Joined: 10 Nov 2003, 11:53
- Location: Netherlands
Its a Pentium4C CPU, those CPU`s are very good for overclockingKoffy wrote:Am I reading right? You are running a 2.4 ghz at 3.1? Je, Ithink you chip will melt out of the board.
I can set it on 270FSB (x4) thats around 3.3Ghz. But at those speeds my CPU runs unstable.
@ PyroDox: It can never run stable @ 300 Mhz FSB (x4), the maximum (it depends on what sort of cpu you have) is around 270 - 280 FSB. (x4) , for a 2.4Ghz.....
Ow BTW: I have 2 Maxtor 80GB ATA133 HDD`s @ RAID0 (stripe set)
- _I3urlNlouT_
- Drift King
- Posts: 309
- Joined: 09 Nov 2003, 20:58
- Location: Miami, FL
You can turn crowds on in the graphics settings._I3ulNlouT_ wrote:People/ Crowds in NFSU... Can someone please... please....please....please....please.... tell me how you got people/crowds in NFSU demo??? Some1 answer me plz I would appreciate it... btw my best drag time was 25.77 and high-speed:205.52 MP/h without blown engine