What cars would you like to see added to NFS: Underground?
A 3.2Litre M3 engine is not 180hp, it is 380. See it here http://www.fast-autos.net/bmw/bmwm3csl.html. Besides, the Skyline you have in NFSU is R34, not R33, Which is $89,500 new. And if you upgrade your Skyline engine till it has 1000HP, you thing the rest of the car will stand it?. Gearbox, suspension will have to be raplaced, and then yull have to reinforce the chasis, which otherwise will bend like a thin. Viper is AMERICAN made. Pure steel and metal, much harder than a Jap.u can buy an r33 gtr for less than 16k, 280bhp stock. tuning packages can take it to well over 1000bhp, and abbey motorsports produce such a package for 30k. thats about the same price as just buying a viper. also, a company called hamann tune ferrari f50s, f40s, 360 modenas, bmw m5s and porsche 911s etc. finally, an e36 m3 produces 180bhp, and its a 3.2 litre.
- Grez~Supra_RZ-S
- Valued Member
- Posts: 3092
- Joined: 02 Dec 2003, 21:46
- Location: Hair Salon
hang on, i was on about r33 not r34. and the package with abbey motorsport puts uprated gearbox in it. suspension isnt expensive. the abbey motorsports show car is still going strong after two years of amateur drag racing. u say that the viper is american made like its a good thing:P if u want to see how real cars are built, look at the mclaren f1, or the tvr speed 12. and the m3 stats u have are for the e46 m3 csl, which is a tuned m3, and not an e36 which is older.
*sig removed for being too big. limitations are 550x120px & 50kb*
-
- Ricer
- Posts: 5
- Joined: 11 Dec 2003, 03:55
- Location: Rollin' on 24's
My most wanted cars:
Ford Mustang (Any year, as long as its newer-model GT)
Mazda RX8
1985 Nissan 300zx Turbo (Not much different than the 240sx, but my first car was an '85 300zx)
Chevrolet Corvette Z06
BMW M5
1992 Pontiac Grand Am SE 4-Cylinder 16-Valve (Crappy, but it's my current car )
And, pretty much all the cars from HP2, but they wouldn't be very tune-able since they're already realllllllly fast. (most of them anyway)
Ford Mustang (Any year, as long as its newer-model GT)
Mazda RX8
1985 Nissan 300zx Turbo (Not much different than the 240sx, but my first car was an '85 300zx)
Chevrolet Corvette Z06
BMW M5
1992 Pontiac Grand Am SE 4-Cylinder 16-Valve (Crappy, but it's my current car )
And, pretty much all the cars from HP2, but they wouldn't be very tune-able since they're already realllllllly fast. (most of them anyway)
- Grez~Supra_RZ-S
- Valued Member
- Posts: 3092
- Joined: 02 Dec 2003, 21:46
- Location: Hair Salon
- Grez~Supra_RZ-S
- Valued Member
- Posts: 3092
- Joined: 02 Dec 2003, 21:46
- Location: Hair Salon
- hondaforever
- Turbo Charged
- Posts: 59
- Joined: 10 Dec 2003, 23:52
- Location: Earth
Hmmm...
Lets see...
Lancer Evo sounds good,
M5, dude! My next favoritte manufactrurer after honda uis BMW
Honda NSX Type R (Dream Car)
honda accord type s (1996 i think)
Honda Accord Euro R
honda torneo
subaru legacy B4
Mitsu 3000GT
Honda Prelude
pontiac vibe (my parents' car)
95 ford escort LX (hey, why not... idd ike to see what my my dads car could be mod'd)
Lancer Evo sounds good,
M5, dude! My next favoritte manufactrurer after honda uis BMW
Honda NSX Type R (Dream Car)
honda accord type s (1996 i think)
Honda Accord Euro R
honda torneo
subaru legacy B4
Mitsu 3000GT
Honda Prelude
pontiac vibe (my parents' car)
95 ford escort LX (hey, why not... idd ike to see what my my dads car could be mod'd)
-
- Stock
- Posts: 2
- Joined: 17 Dec 2003, 02:41
- Location: Sydney
Sorry mate a 13b Rotary is a Mazda not Isuzu.Naboki wrote:Yeah I know of a Isuzu Gemini 4wd converted to 13b Bridge Port. and is real fast!ac3shi6h wrote:Here is a funny one.... DOES ANYBODY KNOW OF A FAST:
ISUZU
hehe I havn't seen anybody asking for thos Rice Burners yet... hehehehe
cheers
And dont put down isuzu motors. A 1600 Gemini can run as low as 11 seconds and the 2.6L isuzu can push low 10s.
I say add all the Gemini's and Piazzas.
And bring back the old skool dato's and rotars!
Please reread my post... I said CONVERTED as in the guy took out the old piston engine and trew in a Rotary, very common to rotorise a different car here in New Zealand.spikenard00 wrote:Sorry mate a 13b Rotary is a Mazda not Isuzu.Naboki wrote:Yeah I know of a Isuzu Gemini 4wd converted to 13b Bridge Port. and is real fast!ac3shi6h wrote:Here is a funny one.... DOES ANYBODY KNOW OF A FAST:
ISUZU
hehe I havn't seen anybody asking for thos Rice Burners yet... hehehehe
cheers
And dont put down isuzu motors. A 1600 Gemini can run as low as 11 seconds and the 2.6L isuzu can push low 10s.
I say add all the Gemini's and Piazzas.
And bring back the old skool dato's and rotars!
-
- Stock
- Posts: 2
- Joined: 17 Dec 2003, 02:41
- Location: Sydney
- marshallpre1
- Drift King
- Posts: 872
- Joined: 16 Dec 2003, 03:11
- Location: Binghamton University
- VPNeverLoser
- Drift King
- Posts: 677
- Joined: 05 Apr 2004, 03:14
- Location: SouthPole